ASUS Zenbook UM5606
| Hardware | PCI/USB ID | Working? |
|---|---|---|
| Touchpad | PS/2 | Yes |
| Touchscreen & stylus | PS/2 | Yes |
| Keyboard | PS/2 | Yes |
| GPU | 1002:150e |
Yes |
| NPU | Unknown | |
| Webcam | 3277:0059 |
Yes |
| ALS | Yes | |
| Bluetooth | 13d3:3608 |
Yes |
| SD-card reader | 17a0:9755 |
Yes |
| Audio | 1022:15e3 |
Yes |
| Wireless | 14c3:7925 |
Yes |
| Thunderbolt | 1022:151c |
Yes |
| TPM | 1022:17e0 |
Yes |
| Fans | Yes |
This page is for the ASUS Zenbook S 16 (UM5606/UM5606WA), although this may help for other 2024 ASUS laptops with the Ryzen 9 AI chips (HX 365/370) such as the ASUS Vivobook S 16 (M5606) and the ProArt P16 (H7606/H7606WV).
Installation
When booting into the Arch Linux ISO, press the e key to edit the chosen boot option and add the amdgpu.dcdebugmask=0x600 kernel parameter to prevent freezing during installation. This will not be needed after installing, as long as you install both linux-mainline-um5606AUR and either linux-firmware-amd-staging-um5606-gitAUR or linux-firmware-gitAUR afterwards.
If you're using KDE, you need to run systemctl edit --user plasma-kwin_wayland.service and add this to the configuration:
~/.config/systemd/user/plasma-kwin_wayland.service.d/override.conf
[Service] Environment="KWIN_DRM_DISABLE_TRIPLE_BUFFERING=1"
Accessibility
The UEFI may be difficult to navigate using screen readers, and it may be difficult to see the boot menu edit options when inputting the temporary kernel parameter. If necessary, you should proceed with the assistance of a sighted person.
Firmware
fwupd shows the CPU/GPU, TPM, SMU, UEFI firmware, NVMe, System firmware (which can have an attestation added), and the webcam. Most of them show as updatable, but no OTA updates have been released as of the time of writing.
There is an important UEFI update that has been posted on ASUS's website -- to apply it, download the "BIOS for ASUS EZ Flash Utility" (not "for Windows") file, extract the contents to a FAT32 formatted USB drive, reboot and go into the firmware setup, and then go into the "EZ Flash" menu. The update can be found here: [1]
Audio
Out of the box, only the tweeters are used, making the audio soft and tinny. However, this is relatively simple to fix with PipeWire and pipewire-pulse.
Create this pipewire-pulse configuration file:
/etc/pipewire/pipewire-pulse.conf.d/99-speaker-routing.conf
# Pipewire thinks tweeters are 4.0 fronts and woofers are 4.0 rears; upmix.
context.modules = [
{ name = libpipewire-module-loopback
args = {
node.description = "Stereo to 4.0 upmix"
audio.position = [ FL FR ]
capture.props = {
node.name = "sink.upmix_4_0"
media.class = "Audio/Sink"
}
playback.props = {
node.name = "playback.upmix-4.0"
audio.position = [ FL FR RL RR]
target.object = "alsa_output.pci-0000_c4_00.6.analog-surround-40"
stream.dont-remix = true
node.passive = true
channelmix.upmix = true
channelmix.upmix-method = simple
}
}
}
]
Then, restart the pipewire.service and pipewire-pulse.service user units.
Lastly, open pwvucontrolAUR or pavucontrol and switch your output "on" to Stereo to 4.0 upmix.
You can also set Pipewire to to output 4.0 by default, so in rare event an application is surround sound aware, it will output native 4.0 sound. This can be done by selecting the Analog Surround 4.0 Output + Analog Stereo Input profile for Family 17h/19h HD Controller.
Bluetooth
Linux ≥6.12 (rc1) is needed to get Bluetooth working. The aptX HD, LDAC, SBC-XQ codecs over Bluetooth have been tested for and work for wireless headphones.
NPU
There are currently no userspace tools/applications to test the Neural Processing Unit (NPU). However, it should work with both linux-mainline-um5606AUR and linux-firmware-amd-staging-um5606-gitAUR once tools become available.
ALS
The Ambient Light Sensor (ALS) works out of the box on GNOME, and on wlroots/smithay compositors with wlumaAUR and this configuration:
~/.config/wluma/config.toml
[als.iio]
path = "/sys/bus/iio/devices"
thresholds = { 0 = "night", 2 = "dark", 5 = "dim", 8 = "normal", 13 = "bright", 15 = "outdoors" }
[[output.backlight]]
name = "eDP-1"
path = "/sys/class/backlight/amdgpu_bl1"
capturer = "none"
Power management
Install linux-mainline-um5606AUR and either linux-firmware-amd-staging-um5606-gitAUR or linux-firmware-gitAUR to alleviate most power management problems, including high power usage during suspend and random freezing/hanging.
There is currently known a problem when waking up from suspend (s2idle) that the screen will freeze for about 10 seconds. This issue is currently being investigated here: [2]
Keyboard
Backlight
Linux ≥6.12 (rc1) is needed to make keyboard backlight control work.
Function keys
| Key | Visible?1 | Marked?2 | Effect |
|---|---|---|---|
Fn+Esc |
No | Yes | Enables Fn lock |
Fn+F1 |
Yes | Yes |
XF86AudioMuteToggle
|
Fn+F2 |
Yes | Yes |
XF86AudioLowerVolume
|
Fn+F3 |
Yes | Yes |
XF86AudioRaiseVolume
|
Fn+F4 |
No3 | Yes | Adjusts keyboard backlight |
Fn+F5 |
Yes | Yes |
XF86MonBrightnessDown
|
Fn+F6 |
Yes | Yes |
XF86MonBrightnessUp
|
Fn+F7 |
Yes | Screen mirroring icon |
Super+P
|
Fn+F8 |
Yes | Smiley face icon |
Super+.
|
Fn+F9 |
Yes | Yes |
XF86AudioMicMute
|
Fn+F10 |
Yes | Yes |
XF86Webcam
|
Fn+F12 |
Yes | Icon that looks like ⫽] |
XF86Launch1
|
Copilot |
Partial | MS Copilot logo | Registers as Super+Shift, but supposed to input Super+Shift+F23
|
- The key is visible to
xev,showmethekey,screenkey, and similar tools - The physical key has a symbol on it, which describes its function
- The key isn't visible to keycode viewer tools, but it sends a signal that D-Bus picks up on, and GNOME sees it (and shows the OSD popup). The signal looks like this:
signal time=XXXXXXXXX.XXXXXX sender=:1.44 -> destination=(null destination) serial=XXX path=/org/freedesktop/UPower/KbdBacklight; interface=org.freedesktop.UPower.KbdBacklight; member=BrightnessChanged int32 3
Where the int32 can be a value between 0 and 3, denoting which of the four brightness levels the keyboard backlight has been set to (0 = off, 1 = low, 2 = medium, 3 = high).
Fan Control
The firmware supports four fan profiles: standard, quiet, high-performance, and full-performance. Out of the box, it's set to standard, but this can be changed with asus-5606-fan-state-gitAUR.